Height-adjustable standing desks
Sit-stand desk frames to round out a workstation order. Most of our desk buyers are already taking chairs, so the obvious win is pairing both in one container instead of two suppliers.
The frame is where a standing desk lives or dies. We run dual-motor columns because a single motor racks under an off-centre load and starts to creak; two motors share the lift and hold a level surface up to roughly 125 kg. Travel covers a typical 700–1200 mm range with four memory presets and anti-collision on the controller.
We do not pretend a desk is our heritage — the chair is. So we keep the desk line deliberately tight: a few proven frames you can fit your own tops to, rather than a sprawling catalogue we cannot stand behind. If you need exotic tops or a specific certification, tell us and we will quote it straight rather than improvise.
Typical specification
| Lift | Dual-motor, ~700–1200 mm travel, ~125 kg dynamic load |
|---|---|
| Controller | Digital handset, 4 memory presets, anti-collision |
| Frame | Three-stage or two-stage steel legs, powder-coat finish |
| Top | Your spec — MDF/laminate or bamboo; we frame, you choose the surface |
| Speed / noise | ~38 mm/s, under ~50 dB in motion |
| Testing | Frame cycle-tested to EN 527 patterns; reports on request |
Specs above are typical build options, not a fixed datasheet — tell us your market and target price and we'll confirm what we'd actually quote, including which choices we'd talk you out of.
Send us the spec — we'll quote the real thing
Models, quantities and your market in a few lines. If a job is outside what we run well, we'll say so instead of burning your sampling budget.